Filters

List of pipe flange scrap Tenders

List of latest pipe flange scrap Tenders in Indian Tenders. Click on any pipe flange scrap Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pipe flange scrap Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35924538 | 22 Nov, 2025

Tender Value : 0

Pandharpur - Maharashtra

Tender for excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete , providing dry trap /granigt/quartizite/gneisses rubble stone soiling in 15cm to 20 cm thicknlayers including hand packing and compacting etc , providing and laying in situ, following m10(1:3:6) grades of c.c.of trap / granite/ quartzite/ gneiss metal for foundation and bedding including dewatering, formwork, compacting and curing, finishing, etc. complete. , providing second class burnt brick masonry with conventional / i.s.type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc complete. , providing and casting insitu c.c. of trap / granite / quartzite / gneiss metal of approved quality for rcc work as per detailed drawings and designs or as directed by engineer-in-charge including normal dewatering, centering, 'plywood formwork, bully / steel prop-ups, compaction, finishing the formed surfaces with cm 1:3 of sufficient minimum thickness to givea smoot hand even surface wherever necessary or roughening if special finish is to be provided and curing,etc. complete. (by weigh batching and mix design for m-250 and m- 300 only. use of l & t, a.c.c., ambuja, birla gold, manikgad,rajashree,etc.cement is permitted) (excluding m.s,or tor reinforcement) , providing internal cement plaster of 12mm thik chamber single coat in cement mortor 1:4 without nerru plaster finish to concrete or brick surface in all position including scaffolding and curing etc completed. ,providing and fixing in position steel bar reinforcement of various diameters for rcc piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc.as per detailed designs, drawings and schedules; including cutting, bending, hooking thebars,binding with wires or tack welding and supporting as required,etc. complete (including cost of binding wire) is 1786, (bd-f-17/306) ,providing, laying and fixing p.v.c.pipe of 110 mm dia.with fittings such as bends, tees, reducers, clamps, etc.including necessary excavation, trench filling etc.complete. includin gremoving existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete ,10% special item for pvc pipe , providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for base ment orunder ground floor on a base of cement concrete 1:3:6, including subbase of 2.50 centimeter thick cementmortar 1:3 with conceal,secrete(rmw),algae proofor other a like waterproofing liquids,raking of joints upto 35mm depth,filling the joints with 6mm size crushed metal,hand grouting with cement slurry,curing and cleaning,with 7 year sguaran tee on courtfee stamp of rs.100/-with ponding test etc complete. (excluding cement concrete1:3:6 base concrete ) sub work no 2 dewats- for anarobic baffled reactor- item no1:-excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete item no 2:- excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a do\istance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc comp item no 3:- excavation for foundation / pipe trenches in hard murum boulders including removing the excavated material upto a do\istance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc comp item no 4 :-excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc comp item no. 5- providing and laying in situ cement concrete m-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water,form work, compaction, curing, etc.complete (cement 5.90 bags /cum) spec. no. - bd e /1 page no. 287 and b- 7, page no. 38 a) in pcc m-150 item no. 6-providing and casting in situ c.c. of trap / granite/ quartzite / gneiss metal of approved quality for rcc works as per detailed drawings and designs or as directed by engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with c.m. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (by weigh batching and mix design for m-250 and m- 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) m-250 item no 7:-providing and fixing in position steel bar reinforcement of various diameters for rcc piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc.as per detailed designs, drawings and schedules; including cutting, bending, hooking thebars,binding with wires or tack welding and supporting as required,etc. complete (including cost of binding wire) is 1786, (bd-f-17/306) item no.8- supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of engineer in-charge item no 9:- supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer incharge for root zone treatment -item no1:- excavation for foundation / pipe trenches in earth ,soils of all types sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation &neccesary back filling etc item no 2:- excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a do\istance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc item no 3:- excavation for foundation / pipe trenches in hard murum boulders including removing the excavated material upto a do\istance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc item no 4 :-excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m & lift as below stacking and sprading as directed dewatering shoring & struting preparing the bed for the foundation & neccesary back filling etc item no. 5- providing and laying in situ cement concrete m-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water,form work, compaction, curing, etc.complete (cement 5.90 bags /cum) spec. no. - bd e /1 page no. 287 and b- 7, page no. 38 a) in pcc m-150 item no. 6-providing and casting in situ c.c. of trap / granite/ quartzite / gneiss metal of approved quality for rcc works as per detailed drawings and designs or as directed by engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with c.m. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (by weigh batching and mix design for m-250 and m- 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) m-250 item no.7- providing and fixing in position steel bar reinforcement of various diameters for rcc piles, caps, footings, foundations,slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches,etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (bd-f 17/306) tor steel item no.8- supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of engineer in-charge item no 9:- supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer incharge

corporations/Associations/Others

TRN :35914681 | 01 Dec, 2025

Tender Value : 0

Salem - Tamil Nadu

Tender for mtps i tm unit ii transporting the valves from central store replacing the defective extraction steam to hp heaters 5 6 isolation valves es 5 es 6 mc 29 mc nrv deaerator floor bfp suction valves 2c ca 24 eroded drip line reducers

Central Government/Public Sector

TRN :35897966 | 27 Nov, 2025

Tender Value : 0

Lohitpur - Arunachal Pradesh

Tender for gem bids for non skid floor tiles 300 mm x 300 mm x 8mm thick forbathroom wall tiles 450 mm x 300 mm x 8mm thick forbathroom solid pvc doors for bathrooms 32 inch withframe and all accessories with isi mark mason thread tiles cleaner 1 ltr harpic toilet cleaner 1 ltr bear prooflock hacksaw blade 12 inch x 1 inch x pt 075 inch doubleedge europian type w c complete set with isi mark floortrap 4 inch with hole with isi mark wall hang cistern with llong bend with gasket with isi mark ss sink 20 x 22 inchwith coupling with isi mark ss towel rod 2 feet long sstowel ring cp flange wash basain with stand with isimark cp extension nipple 2 inch with isi mark cpextension nipple 1 pt 5 inch with isi mark cp extensionnipple 1 inch with isi mark pvc waste pipe for wash basinwith isi mark pvc connection pipe 24 inch with isi mark cp connection pipe 24 inch with isi mark cp hex nipplehalf inch with isi mark pvc connection pipe male femaleend for basin mixture with isi mark pvc elbow 50 mm withisi mark pvc elbow 63 mm with isi mark pvc tee 63 mmwith isi mark pvc elbow 90 mm with isi mark pvc tee 90mm with isi mark pvc elbow 110 mm with isi mark pvcsocket 110 mm with isi mark pvc reducer socket 110oblique 75 mm with isi mark taflon tape cp flange 1 inch wall mixer 3 in1 with isi mark shower 6 inch with arm 18inch long health faucet with 8mm dia 1 pt 2mtr longflexible tube and wall hook brass float valve with floatwith isi mark pvc cowl 110 mm with isi mark butter flyclamp garden pipe flexible pvc pipe with isi mark pvccowl 90 mm with isi mark upvc elbow 2 inch with isi mark upvc fapt 2 inch with isi mark upvc tank nipple 2 inchwith isi mark upvc union 2 inch with isi mark upvc fabt3 by 4 x half inch with isi mark upvc 2 by 1 inch reducersocket with isi mark upvc brass tee half inch with isi bid number gem2025b6862114 dated 14-11-2025 bid document1 81 1 1 mark, upvc nail clamp 1 inch, upvc elbow 3 by 4 inch withisi mark, upvc elbow half with isi mark, upvc union 1 inchwith isi mark, upvc pipe half inch 3 mrt long with isi mark, upvc fabt half inch with isi mark, upvc brass elbow halfinch with isi mark, upvc nail clamp half inch, upvc nailclamp 3 by 4 inch, upvc bushing 2 inch x 1 and half inch, upvc mapt 3 by 4 inch, upvc ball valve 3 by 4 inch, fastner volt for wash basin fixing, cpvc elbow 1 and halfinch with isi mark, cpvc tee 1 and half inch with isi mark, cpvc socket 1 and half inch with isi mark, cpvc nail clamp3 by 4 inch, cpvc fapt 3 by 4 x half inch with isi mark, cpvc nail clamp 1 inch, cpvc elbow 3 by 4 inch with isimark, g i socket half inch with isi mark, g i tee half inchwith isi mark, g i nipple half inch x 6 inch with isi mark, g inipple half inch x 4 inch with isi mark, g i nipple half inch x2 inch with isi mark, g i union half inch with isi mark, g ielbow half inch with isi mark, electric wire copper 1 sqmm90 mtr with isi mark, led bulb 12 watt yellow colour withisi mark, led ceiling light pannel type round shape 12watt yellow colour with isi mark, socket 05 amp with isimark, switch socket combind 16 amp with isi mark, callbell electric with isi mark, electric fan regulator with isimark, batten holder with isi mark, pendent holder with isimark, mcb 32 amp with isi mark, mcb 32 amp double polewith isi mark, mcb 10 amp with isi mark, pvc switchboard 6 inch x 4 inch with isi mark, pvc switch board 8inch x 6 inch with isi mark, e lectric wire aluminium 10sqmm 2 core btc wire 90 mtr with isi mark, electric wirealuminium 25 sqmm single core btc wire 90 mtr with isimark, fan capacitor 2 pt 5 mfd with isi mark, changing ofcurrent led driver 30 w with isi mark, casing caping 1inch x 2 mtr with isi mark, led street light 60 wt with isimark, pvc conduit pipe 25 mm dia 3 mtr long with isi mark, pvc conduit bend 25 mm with isi mark, globe light withholder with isi mark, tube rod 4 feet long with isi mark, china screw 8mm, hrc fuse base plate 630 amp with isimark, zero power led bulb with isi mark, plywood 8 feet x4 feet x 6 mm with isi mark, plywood 8 feet x 4 feet x 12mm with isi mark, plywood 8 feet x 4 feet x 19mm with isimark, looking mirror 1 pt 5 feet x 2 feet with isi mark, selfdrill screw 2 inch with isi mark, self-drill screw 3 inch withisi mark, handel wooden screw 1 inch full thread with isimark, headless pannel pin 1 inch with isi mark, hinges 3inch ss with isi mark, screw for sliding bolt with isi mark, screw for gypsum board 1 inch with isi mark, screw forcabinet handel with isi mark, door closer hydraulic with isimark, cutting wheel 105 mm norton champ, wood cuttingblade 4 inch with isi mark, tile cutter blade 4 inch with isimark, vinyl sheet for flooring with isi mark, daimondglass cutter, hinges 4 inch with isi mark, red oxide primerwith isi mark, exterior oblique interior paint white colourwith isi mark, oil bound distemper white with isi mark, paint enamal sky blue with isi mark, paint enamel whitewith isi mark, paint enamel po red 4 ltr each drum with isimark, paint enamel yellow with isi mark, golden paint 200ml pack with isi mark, snowcem brick red with isi mark, pop with isi mark, wall putty white with isi mark, puttyappicator, painting brush 1 inch, painting brush 2 inch, painting brush 3 inch, painting brush 4 inch, painting rollerbrush, writing brush, white wash brush, wire brush, emery paper 80 no

State Government

TRN :35884309 | 15 Dec, 2025

Tender Value : 0

Hisar - Haryana

Tender for overhauling of boiler pressure parts, high pressure valves, burners, wind-box, restoration of dss assembly, revival or re-installation of ervs, revival of dummied reducers, restoration of sagged roof during forthcoming oh of unit 2, 2x600 mw rgtpp

Central Government/Public Sector

TRN :35823325 | 26 Nov, 2025

Tender Value : 0

Asansol - West Bengal

Tender for procurement of pvc reducers

corporations/Associations/Others

TRN :35816726 | 26 Nov, 2025

Tender Value : 0

Salem - Tamil Nadu

Tender for supply of various size of alloy steel carbon steel pipes bends reducers t s and stubs as per specification 15 items

Central Government/Public Sector

TRN :35795901 | 24 Nov, 2025

Tender Value : 1.00 Crore

Uttara Kannada - Karnataka

Tender for gem bids for calibration services - mechanical; removal, transportation, overhauling, fitment and trails of reducers & relief valves; nabl labs; buyer premises (onsite)

Central Government/Public Sector

TRN :35773442 | 24 Nov, 2025

Tender Value : 0

Ahmedabad - Gujarat

Tender for gem bids for self ballasted led lamps for general lighting services v2conforming to is 16102 q2, led batten q2, ledluminaire for road and street lights v2 conforming to is10322 part 5 / section 3 q3, led luminaire recessedluminaire v3 conforming to is 10322 part 5/section 2q3, molded case circuit breakers mccb as per is / iec60947 q3, led ftl tube rod 28 watts white, led surgeprotector for 2x 2 36watt led fitting, led buib 50w b22, led buib 70w b22, led fitting 10 w, led tbulb 18 wattb22, led tbulb 10 watt b22, led tube light 40w brightwhite, led tube light 40w warm white, led tube light60w bright white, automatic outdoor street light switch, pvc insulated frlsh 01 core copper conductor 4 sqmm, pvc insulated copper cable 01 core 1 point 5 sqmm, pvcinsulated cable copper 01 core 2 point 5sqmm, cable pvcfrls copper flexible 01 core2 sqmm, gi union 20mm, gielbow 15 mm, gi socket 15mm, gi union 15mm, gi nipple15 mm dia 9 inch, gi nipple 20 mm dia 9 inch, gi nipple 25mm dia 4 inch, gi nipple 25 mm dia 9 inch, gi reducersocket 25x20mm, gi tee 15 mm, gi tee 20 mm, gi union40mm, gi elbow 20mm, gi socket 20mm, gi union 25mm, gi nipple 15x100 mm long, gi nipple 20x100 mm long, gi tubing 15 mm, gi tubing 20 mm

Related Searched Keywords : pipe flange scrap

List of pipe flange scrap Tenders

Tender for mtps i tm unit ii transporting the valves from central store replacing the defective extraction steam to hp heaters 5 6 isolation valves es 5 es 6 mc 29 mc nrv deaerator floor bfp suction valves 2c ca 24 eroded drip line reducers

Tender for overhauling of boiler pressure parts, high pressure valves, burners, wind-box, restoration of dss assembly, revival or re-installation of ervs, revival of dummied reducers, restoration of sagged roof during forthcoming oh of unit 2, 2x600 mw rgtpp

Tender for procurement of pvc reducers

Tender for supply of various size of alloy steel carbon steel pipes bends reducers t s and stubs as per specification 15 items

Tender for gem bids for calibration services - mechanical; removal, transportation, overhauling, fitment and trails of reducers & relief valves; nabl labs; buyer premises (onsite)

Get pipe flange scrap Tender Alert...

Related Searched Keywords : pipe flange scrap

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us